Insulated boxes – APO
- The range consists of nine boxes based on the 300 and 185 mm modules
- The bases are made of grey (RAL 7035), hot moulded glass fibre reinforced polyester, dyed in mass. These come complete with M4 threaded inserts (Dodge) for fixing a mounting plate or mounting frame
- The cover is made of either transparent polycarbonate or opaque grey (RAL 7035) hot moulded glass fibre reinforced polyester, dyed in mass
- APO-boxes provide optimum security to both operators and equipment because they feature total insulation and protection degree IP67 according to IEC 60529 and EN 60529
- Protection degree IK10 against external mechanical impacts according to EN 50102
- This protection covers the total volume of the enclosure according to EN 50298
- Each large box is a multiple of a smaller one. Its fixing points are also a multiple of those of a small box. These fixing points are blind holes for M4 threaded inserts
- The box can be readily worked with conventional tools, such as drills, cutting mills, saws, punches, etc
- Four to six blind holes for M6 threaded inserts are also provided in each base
- APO polyester boxes are designed for both wall end pole mounting
- The box can be readily worked with conventional tools such as drills, cutting mills, saws punches, etc
- Versatile service conditions: polyester enclosures can withstand continuous temperatures up to70°C (peak temperatures up to 150°C) and the transparent polycarbonate covers resist service temperature up to 120°C
- APO polyester boxes are maintenance-free and corrosion resistant
- Rated insulation voltage Ui = 1000V
- APO boxes are UL listed, as per UL Standard 508, types 3, 3R, 4, 4X, 6, 6P, 12 and 13
- They are also CSA approved
Pedestals: EH1
- Small outdoor enclosure with integrated base
- Hood grey colour RAL 7036
- Ventilated version in thermoplastic engineering polymer
- Non ventilated version in hot moulded, glass fibre reinforced polyester
- Blackened triangular zamac locking screws, vandalproof and for all seasons
- IP43 for the non ventilated hoods
- IP23 for the ventilated hoods
- Protection degree IK10 against external mechanical impacts according to EN 50102
- Base in high density polyethylene (HDPE) RAL 9005
- Base resists a ground temperature of -50°C
- The upper part of the base serves as a mounting plate and is provided with three slots for fixation points
- Easy to install by one person only (weight: 4.5 kg)
Pedestals: EH2 Short
- Enclosure made of hot moulded, glass fibre reinforced polyeste
- Dyed in mass RAL 7035 light grey
- Protection degree IP43 according to EN 60529, IEC 60529 and BS 5490
- Total insulation
- Protection degree IK10 against external impacts according to EN 50102
- Corrosion resistant
- UV stabilised for outdoor applications
- Suitable for use in environments from -35° C to + 125°C
- Temporary exceeding temperatures will not be harmful
- Fully integrated locking clamp, suitable for operation by a half profile cylindric lock
- The cylindric lock can be fitted in a recessed lock box, protected by a vandal proof plastic cap
- he enclosure can be accessed by removing the frontal lift-off segment (not hinged)
- Fixing holes for threaded inserts M6 are provided in the rear panel allowing direct mounting of busbars, a frame, a mounting plate or components
- The bottom is closed with a bottom plate in glassfibre reinforced polyester, allowing for floor mounting or wall mounting
- The rainhood shape prevents water stagnation on the roof
Pedestals: EH2
- Columns made of hot moulded, glass fibre reinforced polyester
- Dyed in mass RAL 7035 light grey
- Protection degree IP44 according to EN 60529, IEC 60529 and BS 5490
- Total insulation
- Protection degree IK10 against external impacts according to EN 50102
- Corrosion resistant
- UV stabilised for outdoor applications, coated version for improved resistance against UV-corrosion
- Suitable for use in environments from -35° C to + 125°C. Temporary exceeding temperatures will not be harmful
- Fully integrated locking clamp, suitable for operation by a half profile cylindric lock
- The cylindric lock can be fitted in a recessed lock box, protected by a vandal proof plastic cap
- The enclosure can be accessed by removing the frontal lift-off segments (not hinged)
- Fixing holes for threaded inserts M6 are provided in the rear panel allowing direct mounting of busbars, a frame, a mounting plate or components. Inserts to fix the mounting plate are already installed
- The base and the rear panel of the column are molded as one part
- The base allows for stable installation of the column
- For easy access to the inside of the cabinet, the hinged roof offers an opening angle of 90°
- The rainhood shape prevents water stagnation on the roof
Pedestals: EH3
- Cabinets made of hot moulded, glass fibre reinforced polyester
- Dyed in mass RAL 7035 light grey
- Delivered in kit-form (on request: factory assembled)
- Protection degree IP44 according to EN 60529, IEC 60529 and BS 5490
- Total insulation
- Protection degree IK10 against external impacts according to EN 50102
- Corrosion resistant
- UV stabilized for outdoor applications, coated cabinets for increased resistance against UV-corrosion on request
- Suitable for use in environments from -35° C to + 125° C. Temporary exceeding temperatures will not be harmful
- The open door can be manually unhinged to allow free access for maintenance
- Threaded inserts for bolts M10 are moulded in the rear panel, allowing for direct mounting of busbars, a frame or a mounting plate for components
- Supplied with open bottom – To be mounted on a basement according to DIN 43629 standard dimensions between the fixation points
- The rainhood shape prevents water stagnation on the roof
- Cabinets can be coupled together side to side or double deep
EH3 Product Range
- EH3/F – Cabinets with flat surface.
- Four sizes in four different widths; all sizes feature the same height and depth
- Three point locking mechanism, operated by a recessed handle
- The integrated, recessed handle is designed to receive a half profile cylindric lock
- EH3/AP-Cabinets with anti fly posting surface
- Eight sizes in four different widths and two different heights; all sizes feature the same depth
- Three point locking mechanism, operated by a solid handle
- The solid, not recessed handle allows for more usable space inside the cabinet and is designed to receive a half profile cylinder lock
- Profiled door and rear panels make poster sticking difficult and causes poster to drop off
EH3/DC – Pedestals with two separate compartments.
- Two sizes in two different widths, both sizes feature the same height and depth
- Two compartments partitioned for separate functional requirements
- Shipped fully assembled
- Each door has a three point locking mechanism operated by a recessed handle designed to receive a half profile cylindric lock
- The open doors can be manually unhinged to allow free access for maintenance
- To be mounted on a basement according to DIN 43629 standard dimensions between the fixation points
- Cabinets can be coupled together side to side or double depth
EH3/GD – Cabinets with Greater Depth.
- Six sizes in two heights, two depths and three widths
- Shipped fully assembled
- Protection degree IP23 according to EN 60529, IEC 60529 and BS 5490
- Possibility of pivoting door on side or back
- The open doors can be manually unhinged to allow free access for maintenance
Pedestals: EH4
- Pedestal and base are made of hot moulded glass fibre reinforced polyester
- Dyed in mass RAL 7035 light grey
- Protection degree IP43/IP44 according to EN 60259, IEC 60259 and BS 5490
- Total insulation
- Impact strength IK10 against external impacts according EN 50102
- Corrosion resistant
- UV stabilised for outdoor applications
- Suitable for use in environments from 135°C to +125°C
- Temporary exceeding temperatures will not be harmful
- Fixing holes for threaded inserts M6 are provided in the rear panel allowing direct mounting of busbars, mounting plate or components
- Inserts to fix a mounting dplate are installed
- The base can be buried into the ground for stable installation of the column
- The rainhood shape prevents water stagnation on the roof
- Pedestal and base are delivered together
- Swing handle for half profile cylindrical lock
- Door opening angle of 180°
- Cabinets with frontal lift-off segments – IP44
- Base and rear panel are moulded as one part
- Recessed lock box for half profile cylindrical lock, protected by a vandal proof cover
- The enclosure can be accessed by removing the frontal lift-off segments (not hinged)
Pedestals: EH6
- Cabinets are made of hot moulded, glass fibre reinforced polyester
- Dyed in mass RAL 7035 light grey
- Three sizes in three widths;all sizes feature the same height and depth
- Each size is available in two protection degrees; IP44 and IP54 according to EN 60529, IEC 60529 and BS 5490
- Delivered in space saving kit-form or factory assembled
- Total insulation
- Protection degree IK10 against external impacts according to EN 50102
- Corrosion resistant
- UV stabilized for outdoor applications
- Suitable for use in environments from -35°C to + 125°C. Temporary exceeding temperatures will not be harmful
- Three point locking mechanism, operated by an integrated handle
- The open doors can be manually unhinged to allow free access for maintenance
- The door opening angle exceeds 180°
- The rear panel has mounting holes for self tapping screws HiLo 7.2 x 26 mm and threaded inserts M8, allowing direct mounting of busbars, a frame, a mounting plate for components
- Supplied with open bottom
- To be mounted on a plinth according to DIN 43629 standard dimensions between the fixation points
- The rainhood shape prevents water stagnation on the roof
- Cabinets can be coupled side to side or double deep
- Cabinets can be coupled together side to side or double depth
RVS – Pedestals in stainless steel
- Cabinets are made of 2 mm AISI 304 stainless steel with polyester surface treatment in RAL 7034
- Anti-graffiti treatment available on request
- Other RAL colours available on request
- Doors are fitted with stainless steel hinged rods (8 mm) and the opened door is easy removable without tools
- Doors hinge pins turn in nylon bushings, no corrosion at critical points of rotation is possible
- Natural ventilation with protection degree IP43
- Large opening between doors and cabinet frame, no moisture accumulation is possible
- Automatic condensation evacuation thanks to unique design of cabinet base
- Natural ventilation thanks to labyrinth openings on top of the side panels and special base design
- No internal moisture problems thanks to polystyrene plate inside the roof panel; any moisture formed is automatically discharged along vertical sides of cabinet
- A 3 point rod closing mechanism sliding in synthetic bearings for high cabinets and double door cabinets. A single locking point mechanism for smaller doors
- Standard handle suitable for profile half-cylinder lock. Other lock types are available on request
- Cabinet suitable for fixing, with four M12 bolts, to concrete or stainless steel basements according to DIN 43629. The stainless steel fixing bolts are adjustable
- Wall mounting brackets and a stainless steel bottom plate in the RAL 7034 are available in case of wall mounting
- Four or six fixing holes in rear panel for mounting a mounting plate or frame
- Cables easily inserted thanks to removable bottom profile
- Guaranteed earthing independent of corrosionsensitive transitional surfaces
RVS Features:
- The cabinets can be placed on either concrete or stainless steel bases
- They can also be adapted for wall mounting
- The protection degree IP43-IK 10 according to IEC 60529 and EN 50102
- A high mechanical impact resistance according to IEC 60439-5 ensures that the cabinet is extremely vandal proof
- Flexibility in dimensions, colour and design
- Easy and cheap to recycle
- Guaranteed 30-year service life
- Maintenance-free
- Good mechanical properties (IEC 60947)
- High torsion resistance
- Resists impact test with sharp point according to EN 60439-5
- High IK value
- Twists and bends (no tears or holes) on impact
- High fire resistance
- High vandal resistance
- Special designs rapidly available, even as single orders
Insulated Wall Mounting Cabinets – ARIA
- The range is available in seven sizes, ranging from 300 x 200 to 1000 x 800 mm
- The cabinets are made of light-grey (RAL 7035) hot moulded, glass fibre reinforced polyester, dyed in mass
- The enclosure is furnished with four threaded studs and bolts for mounting plate or mounting frame installation
- The enclosure provides total insulation and a protection degree of IP66 following IEC 60529 and EN 60529
- Protection degree IK10 against external mechanical impacts according to EN 50102. (IK07 for cabinets with glazed door)
- Resists temperatures up to 70°C in continuous use (peak temperatures up to 150°C)
- Self extinguishing and halogen-free
- Cabinets are maintenance free and corrosion resistant
- Rated insulation voltage Ui = 1000V
ARIA New Features:
- Ergonomic closing mechanism
- A two point locking mechanism and operated by swing-handle (for profile half cylinder locks) Reducing closing force by 25%
- Patented doorlifter ensuring the door taking it’s center position during closing (as from ARIA 75)
- Self-adhesive rainhood as a standard accessory with each cabinet
Ideal for high performance applications in
- Heavy industry (pulp & paper mills, mining sites, wood & lumber production, steel mills)
- Petroleum refineries, chemical and petrochemical plants
- Temporary connection (for construction yards, camping sites, harbours for pleasure crafts, market places, fairs)
- Alimentation industry and breweries
- Waste water treatment, public lighting, traffic control, signalisation
- For installation in aggressive environments such as shipyards, offshore oil production platforms, mining sites
Insulated Wall Mounting Cabinets – PolySafe
- 14 standard dimensions (from 500 x 500 up to 1250 x 1000) in one depth 320 mm
- Cabinets are standard factory assembled (empty or equipped)
- High protection degree IP65-IK10 (20J) according to IEC 60529 and EN 50102 (IP55 – IK07 for cabinets with glazed door)
- Material: self-extinguishing, hot moulded, halogen-free, fiberglass reinforced polyester (environment friendly)
- Colour: grey RAL7035, dyed in mass
- Designed for wall mounting, floor standing and pole fixing
- Coupling possibilities in height, width and depth
- Total insulation
- Door with 5-point latching mechanism
- Execution as pedestal possible
- Rated insulation voltage Ui= 1000V
- Easy recyclable: no moulded-in metal parts
- Suitable for aggressive and marine or corrosive environments
PolySafe New Features:
- Ergonomic closing mechanism
- Reducing closing force by 25%
- Patented doorlifter ensuring the door taking it’s center position during closing (for bigger dimensions)
Ideal for high performance applications in
- Commercial: leisure (market places, camping sites, harbours for pleasure crafts, amusement parks), fuel stations, car washes, launderettes and laundries, service enclosures for construction yards
- Industrial: shipyards, mining, automotive, paper & pulp, food and beverage, petrochemicals, transformers, system monitoring
- Utilities: waste water treatment, waste management, telecommunications, traffic signalisation, traffic control, public transport, energy distribution (electricity, gas, water), cable television (CATV), public lighting, railways