Pedestals: EH6
- Cabinets are made of hot moulded, glass fibre reinforced polyester
- Dyed in mass RAL 7035 light grey
- Three sizes in three widths;all sizes feature the same height and depth
- Each size is available in two protection degrees; IP44 and IP54 according to EN 60529, IEC 60529 and BS 5490
- Delivered in space saving kit-form or factory assembled
- Total insulation
- Protection degree IK10 against external impacts according to EN 50102
- Corrosion resistant
- UV stabilized for outdoor applications
- Suitable for use in environments from -35°C to + 125°C. Temporary exceeding temperatures will not be harmful
- Three point locking mechanism, operated by an integrated handle
- The open doors can be manually unhinged to allow free access for maintenance
- The door opening angle exceeds 180°
- The rear panel has mounting holes for self tapping screws HiLo 7.2 x 26 mm and threaded inserts M8, allowing direct mounting of busbars, a frame, a mounting plate for components
- Supplied with open bottom
- To be mounted on a plinth according to DIN 43629 standard dimensions between the fixation points
- The rainhood shape prevents water stagnation on the roof
- Cabinets can be coupled side to side or double deep
- Cabinets can be coupled together side to side or double depth
Pedestals: EH4
- Pedestal and base are made of hot moulded glass fibre reinforced polyester
- Dyed in mass RAL 7035 light grey
- Protection degree IP43/IP44 according to EN 60259, IEC 60259 and BS 5490
- Total insulation
- Impact strength IK10 against external impacts according EN 50102
- Corrosion resistant
- UV stabilised for outdoor applications
- Suitable for use in environments from 135°C to +125°C
- Temporary exceeding temperatures will not be harmful
- Fixing holes for threaded inserts M6 are provided in the rear panel allowing direct mounting of busbars, mounting plate or components
- Inserts to fix a mounting dplate are installed
- The base can be buried into the ground for stable installation of the column
- The rainhood shape prevents water stagnation on the roof
- Pedestal and base are delivered together
- Swing handle for half profile cylindrical lock
- Door opening angle of 180°
- Cabinets with frontal lift-off segments – IP44
- Base and rear panel are moulded as one part
- Recessed lock box for half profile cylindrical lock, protected by a vandal proof cover
- The enclosure can be accessed by removing the frontal lift-off segments (not hinged)
Pedestals: EH3
- Cabinets made of hot moulded, glass fibre reinforced polyester
- Dyed in mass RAL 7035 light grey
- Delivered in kit-form (on request: factory assembled)
- Protection degree IP44 according to EN 60529, IEC 60529 and BS 5490
- Total insulation
- Protection degree IK10 against external impacts according to EN 50102
- Corrosion resistant
- UV stabilized for outdoor applications, coated cabinets for increased resistance against UV-corrosion on request
- Suitable for use in environments from -35° C to + 125° C. Temporary exceeding temperatures will not be harmful
- The open door can be manually unhinged to allow free access for maintenance
- Threaded inserts for bolts M10 are moulded in the rear panel, allowing for direct mounting of busbars, a frame or a mounting plate for components
- Supplied with open bottom – To be mounted on a basement according to DIN 43629 standard dimensions between the fixation points
- The rainhood shape prevents water stagnation on the roof
- Cabinets can be coupled together side to side or double deep
EH3 Product Range
- EH3/F – Cabinets with flat surface.
- Four sizes in four different widths; all sizes feature the same height and depth
- Three point locking mechanism, operated by a recessed handle
- The integrated, recessed handle is designed to receive a half profile cylindric lock
- EH3/AP-Cabinets with anti fly posting surface
- Eight sizes in four different widths and two different heights; all sizes feature the same depth
- Three point locking mechanism, operated by a solid handle
- The solid, not recessed handle allows for more usable space inside the cabinet and is designed to receive a half profile cylinder lock
- Profiled door and rear panels make poster sticking difficult and causes poster to drop off
EH3/DC – Pedestals with two separate compartments.
- Two sizes in two different widths, both sizes feature the same height and depth
- Two compartments partitioned for separate functional requirements
- Shipped fully assembled
- Each door has a three point locking mechanism operated by a recessed handle designed to receive a half profile cylindric lock
- The open doors can be manually unhinged to allow free access for maintenance
- To be mounted on a basement according to DIN 43629 standard dimensions between the fixation points
- Cabinets can be coupled together side to side or double depth
EH3/GD – Cabinets with Greater Depth.
- Six sizes in two heights, two depths and three widths
- Shipped fully assembled
- Protection degree IP23 according to EN 60529, IEC 60529 and BS 5490
- Possibility of pivoting door on side or back
- The open doors can be manually unhinged to allow free access for maintenance
Pedestals: EH2
- Columns made of hot moulded, glass fibre reinforced polyester
- Dyed in mass RAL 7035 light grey
- Protection degree IP44 according to EN 60529, IEC 60529 and BS 5490
- Total insulation
- Protection degree IK10 against external impacts according to EN 50102
- Corrosion resistant
- UV stabilised for outdoor applications, coated version for improved resistance against UV-corrosion
- Suitable for use in environments from -35° C to + 125°C. Temporary exceeding temperatures will not be harmful
- Fully integrated locking clamp, suitable for operation by a half profile cylindric lock
- The cylindric lock can be fitted in a recessed lock box, protected by a vandal proof plastic cap
- The enclosure can be accessed by removing the frontal lift-off segments (not hinged)
- Fixing holes for threaded inserts M6 are provided in the rear panel allowing direct mounting of busbars, a frame, a mounting plate or components. Inserts to fix the mounting plate are already installed
- The base and the rear panel of the column are molded as one part
- The base allows for stable installation of the column
- For easy access to the inside of the cabinet, the hinged roof offers an opening angle of 90°
- The rainhood shape prevents water stagnation on the roof
Pedestals: EH2 Short
- Enclosure made of hot moulded, glass fibre reinforced polyeste
- Dyed in mass RAL 7035 light grey
- Protection degree IP43 according to EN 60529, IEC 60529 and BS 5490
- Total insulation
- Protection degree IK10 against external impacts according to EN 50102
- Corrosion resistant
- UV stabilised for outdoor applications
- Suitable for use in environments from -35° C to + 125°C
- Temporary exceeding temperatures will not be harmful
- Fully integrated locking clamp, suitable for operation by a half profile cylindric lock
- The cylindric lock can be fitted in a recessed lock box, protected by a vandal proof plastic cap
- he enclosure can be accessed by removing the frontal lift-off segment (not hinged)
- Fixing holes for threaded inserts M6 are provided in the rear panel allowing direct mounting of busbars, a frame, a mounting plate or components
- The bottom is closed with a bottom plate in glassfibre reinforced polyester, allowing for floor mounting or wall mounting
- The rainhood shape prevents water stagnation on the roof
Pedestals: EH1
- Small outdoor enclosure with integrated base
- Hood grey colour RAL 7036
- Ventilated version in thermoplastic engineering polymer
- Non ventilated version in hot moulded, glass fibre reinforced polyester
- Blackened triangular zamac locking screws, vandalproof and for all seasons
- IP43 for the non ventilated hoods
- IP23 for the ventilated hoods
- Protection degree IK10 against external mechanical impacts according to EN 50102
- Base in high density polyethylene (HDPE) RAL 9005
- Base resists a ground temperature of -50°C
- The upper part of the base serves as a mounting plate and is provided with three slots for fixation points
- Easy to install by one person only (weight: 4.5 kg)
Insulated boxes – APO
- The range consists of nine boxes based on the 300 and 185 mm modules
- The bases are made of grey (RAL 7035), hot moulded glass fibre reinforced polyester, dyed in mass. These come complete with M4 threaded inserts (Dodge) for fixing a mounting plate or mounting frame
- The cover is made of either transparent polycarbonate or opaque grey (RAL 7035) hot moulded glass fibre reinforced polyester, dyed in mass
- APO-boxes provide optimum security to both operators and equipment because they feature total insulation and protection degree IP67 according to IEC 60529 and EN 60529
- Protection degree IK10 against external mechanical impacts according to EN 50102
- This protection covers the total volume of the enclosure according to EN 50298
- Each large box is a multiple of a smaller one. Its fixing points are also a multiple of those of a small box. These fixing points are blind holes for M4 threaded inserts
- The box can be readily worked with conventional tools, such as drills, cutting mills, saws, punches, etc
- Four to six blind holes for M6 threaded inserts are also provided in each base
- APO polyester boxes are designed for both wall end pole mounting
- The box can be readily worked with conventional tools such as drills, cutting mills, saws punches, etc
- Versatile service conditions: polyester enclosures can withstand continuous temperatures up to70°C (peak temperatures up to 150°C) and the transparent polycarbonate covers resist service temperature up to 120°C
- APO polyester boxes are maintenance-free and corrosion resistant
- Rated insulation voltage Ui = 1000V
- APO boxes are UL listed, as per UL Standard 508, types 3, 3R, 4, 4X, 6, 6P, 12 and 13
- They are also CSA approved
VJ-Box
VJ-range consists of seven box sizes in three versions:
- with screw cover
- with stainless steel hinges
- with plastic hinges
- The bases and covers are made of grey (RAL 7035), hot moulded, glass fibre reinforced polyester, dyed in mass
- They come complete with 4 threaded inserts (Dodge) for fixing a mounting plate
- Gaskets that guarantee an optimal tightness degree, are made of polyurethane foam
- All fixing hardware is made of stainless steel
- The box can be readily worked with conventional tools, such as drills, cutting mills, saws, punches, etc
- Versatile service conditions: polyester enclosures can withstand continuous temperatures up to 70°C (158°F) (peak temperatures up to 150°C / 302°F)
- VJ-boxes provide optimum security to both operators and equipment because they feature total insulation and protection degree IP67/IP66 according to IEC 60529
- Protection degree IK10 against external mechanical impacts according to EN 50102
- This protection degree covers the total volume of the enclosure according to EN 50298
- VJ polyester boxes are maintenance-free and corrosion resistant
- Rated insulation voltage Ui = 1000V
- VJ-boxes are UL listed, as per UL Standard 508 and CSA approved as per C22.2 nr. 94 types 3, 3R, 3S, 4, 4X, 6, 12 and 13
Multibox
- 11 different basic enclosures ( from 65x65mm up to 361x254mm) with up to 5 different cover depths
- Material: made of polystyrene or glass-fibre reinforced polycarbonate
- Colour: Grey RAL 7035
- High protection degree, IP66-IK07 for polystyrene, and IP66-IK08 for polycarbonate, by means of injected polyurethane seal
- Polycarbonate boxes are available with smooth side walls (only one entry) or with several metric knock-outs
- Polystyrene boxes are available with smooth side walls or with several metric knock-outs
- Opaque grey or transparent covers
- Designed for surface mounting
- Combinations of heights and widths
- Polystyrene boxes are suitable for use in temperatures up to +70°C, polycarbonate boxes are suitable for use in temperatures up to +120°C
- Total insulation
- High resistance to chemical and aggressive influences
- Non-corrosive and maintenance-free
- Halogen-free (PC) or low-halogen (PS) materials
- Self-extinguishing (UL94-V2)
- Rated insulation voltage Ui = 1000V
Why Multibox
- Customer-specific developments
- Flexible customised entry possibilities
- modular tools
- modification for low quantities
- Different colours available
- Complete assembled and equipped units
GE Power Protection offers you: Customer specific developments for all your applications and requirements, exclusively to meet your needs!
Controlling and singalling units 30mm – Series 077
- Industrial heavy duty chrome operating and signalling devices
- Wide range of opaque and illuminated operating and signalling devices in a wide variety of colours
- Wide choice of contact blocks and light source options available
- High brightness mono LEDs in blue, red, green, yellow and white colours
- Indicating lamp operators with either glass or plastic lenses
- IEC947 compliant
- Wide choice of accessories and metal pushbutton stations