VBS-Busbar System : Non Insulated Busbars
- Non Insulated busbar, pin type system or for type system, for 56 MOD
- Pin type systems 10 sqmm
- Fork type systems 10, 12, 24 and 36 sqmm
- Connector clamps
- Rails (15x3x1000mm) for L1-L2-L3-N systems
- Raised busbar terminals
VBS-Busbar system : Insulated Busbars
- Insulated busbar, pin type system
- Pin type for 2P or 1PN and 3P systems
- Easy to install
- Flat design = gain of space in the enclosure
- Easy to use : cutting instead of sawing
- Clear visibility when connecting the power supply cables
- Universal for all power supplies (2 x 230V, 3 x 230V and 3 x 400 V + N)
Residential Enclosures – Fix-o-Rail Junior
- High resistance material
- Modern design
- Compact construction
- High protection degree
- IP40: 4 modules
- IP43: 8 modules
- Total insulation
- Total security
- Transparent cover allowing visibility of devices
- For all modular equipment
- Available in 4 and 8 modules
- Colour: RAL 7035
- Polystyreen for the base
- Flame resistance: self extinguishing material, resist the 650°C
- Polycarbonate for the lid
- Flame resistance: self extinguishing material, resist the 960°C
Fix-o-Rail 144 F/S
- In accordance with EN60439-1 and IEC 439-1
- Protection degree:
- IP40 – IK07 without door
- IP41 – IK08 with plain door
- IP41 – K07 with transparent door
- Each DIN-rail can be equipped with 24 modules
- Centre distance between two DIN-rails : 150 mm
- Flush mounting depth : 105 mm
- Can be equipped with the Record Plus 160A D-frame
- Colour : RAL 7035
Electrical properties
- Designated voltage : 415Vac
- Designated current : 160A
Masking frame and door
- Rodged masking frame
- Manufactured in quality mild steel of 1 mm thick, cold reduced
- Pre-treated prior to electrostatic powder coating in RAL 7035 (light grey)
- Transparent or plain door
Protection plate
- Made from polyester reinforced with glass fibre
- Easy fixations with 1/4 screws
Base
- Ridged base (mono-block)
- Manufactured in sendzimir zinc plated steel of 1 mm thick (F.O.R 144F)
- Sidewalls foreseen with position lugs (F.O.R 144F)
- Pre-treated prior to electrostatic powder coating in RAL 7035, light grey (F.O.R 144S)
- Knock-outs in the upper, lower and the bottom side of the base
- Fixing points for the fixation of cables with cable ties
Mounting frame
- Ridged and removable mounting frame
- Adjustable in depth (+/20mm) (F.O.R 144F)
- Adjustable left or right (+/10mm) (F.O.R 144F)
- Distance between two DIN-rails: 150 mm
Door
- Transparent or plain door, security lock included
Earth bar (L = 380 mm)
- Copper bar, 12×5 mm, 18 x M5 threaded holes + connectors and screws
Fix-o-Rail Covers
- Protection degree : IP30
- Made from high resistance ABS
- Flame resistance : self extinguishing material, resist the 960°C
- Colour : Grey RAL 7035
- Installation temperature : 15°C up to +60°C
Fix-o-Rail Metal Design
- For surface mounting
- Suitable for DIN-rail mounting devices up to 70 mm as MCB’s, RCCB’s, relays, switches, timers, contactors, etc
- Manufactured from panel flat quality mild steel, cold reduced CR4 from 1.0 mm
- Pre-treated prior to powder coating, fully immersed in iron phosphate solution
- Electrostatic powder coating on a continuous line base colour RAL 7035
- Slotted fixing holes on the base permit all leveling adjustment
- Earth and neutral fitted to the base, each terminal being able to accept a 16 mm² stranded round conductor
- With DIN-rails
- Earth and neutral terminals standard
- Distance between two DIN-rails: 150 mm
- Generous wiring room
- With plain grey or transparent door
- Door opens 180°
Fix-o-rail Metal Standard
- For surface mounting
- Suitable for DIN-rail mounting devices up to 70 mm as MCB’s, RCCB’s, relays, switches, timers, contactors, etc
- Manufactured from panel flat quality mild steel, cold reduced CR4 from 1.0 mm
- Pre-treated prior to powder coating, fully immersed in iron phosphate solution
- Electrostatic powder coating on a continuous line base colour RAL 7035
- Slotted fixing holes on the base permit all leveling adjustment
- Earth and neutral fitted to the base, each terminal being able to accept a 16 mm² stranded round conductor
- With DIN-rails
- Earth and neutral terminals standard
- Distance between two DIN-rails: 150 mm
- Generous wiring room
- With plain grey or transparent door
- Door opens 180°
Abaco S
- Protection degree IP40
- Total insulation : class II
- Four dimensions in two colours
- Colours : grey RAL 7030 and white RAL 9010
- Range from 8 modules up to 39 modules
- Flame resistance : self extinguishing material, resists the 650°C
- Operating temperature : 15°C to +60°C
- Chemical resistance against water, salt solution, acid rain
- Surface mounting with flat panels; easy mounting of cable entries
- The DIN rails can be taken off to make the equipment externally
- The position of the mounting frame can be adjusted
Fix-o-Rail 150 M
- For surface mounting
- Suitable for DIN-rail mounting devices up to 70 mm as MCB’s, RCCB’s, relays, switches, timers, contactors, etc
- Manufactured from panel flat quality mild steel, cold reduced CR4 from 1.0 mm
- Pre-treated prior to powder coating, fully immersed in iron phosphate solution
- Electrostatic powder coating on a continuous line base colour RAL 7035
- Slotted fixing holes on the base permit all leveling adjustment
- Earth and neutral fitted to the base, each terminal being able to accept a 16 mm² stranded round conductor
- With DIN-rails
- Earth and neutral terminals standard
- Distance between two DIN-rails: 150 mm
- Generous wiring room
- With plain grey or transparent door
- Door opens 180°
Fix-o-rail Classic
- Protection degree: IP30
- IP40 with door (optional)
- Colour: RAL 9010
- 13, 26, 39 and 52 modules
- Total insulation (with backplate and door)
- Transparent or plain door
- Surface mounting
- Adjustable DINrail
- Polystyreen for the covers
- Flame resistance: self extinguishing material, resist the 650°C
- Polycarbonate for the transparent doors
- Flame resistance: self extinguishing material, resist the 960°C