• 11151 Amman, Jordan

Miniature Circuit Breakers: Series EP

Below you can find four of our types out of the Series EP.
The EP60 and EP100 are the most commonly used MCB’s in the range of our residential circuit breakers. The EP60 and EP100 are simular to the G60 and G100. However, the G-types are available with the tripping curves B-C-D,while the EP60 and EP 100 only use the K-curve. There is no 1+N execution in the K-curve. A second difference is that the MCB’s within the Series EP have a labelholder, so they can be tagged. For the Series G this is not the case.
The EP100 UC breaker can be used for direct and alternating current.
The EP100 R is used for railway applications.
Our MCB’s within the Series EP can be delivered with following add-on devices:
Auxiliary contacts, undervoltage release (Tele U), shunt trip (Tele L), motor operator (Tele Mp) and panel board switch (PBS).
Accessories are available for the MCB’s within our Series EP.

It also needs to be mentioned that this is not the complete Series EP. We also offer EP-breakers with UL approval. For more details you should go to the Series EP with UL approval page of our website..

See below the main features for this range.

Features / Producttypes EP60 EP100 EP100 UC EP100 R
Standards EN/IEC 60898-1 EN/IEC 60898-1
  EN/IEC 60947-2 EN/IEC 60947-2 EN/IEC 60947-2
  EN/IEC 60898-2
  DIN VDE 0641
  EN 60898
  EN 60947-2
Short circuit breaking capacity (kA) (AC, 60898) 6 10 6 10
Tripping characteristics 8-12 ln (K) and 6 in non tripping ≤ 2 sec. 8-12 ln (K) and 6 in non tripping ≤ 2 sec. B, C B, C
Thermal settings ln (A) 2-63 0,5-63 0,5-63 0,5-63
Rated voltage AC Un ~ (V) 240/415 240/415 230/400 230/400
Rated voltage AC Un = (V) 220/440
Minimum operating voltage U B min ~ (V) 12
Minimum operating voltage U B min = (V) 12
Selectivity class 3
Mechanical/electrical endurance 20000/10000
Tropicalisation acc.to EN/IEC 60068-2 95%RH at 55°C 95%RH at 55°C 95%RH at 55°C
Tropicalisation acc.to IEC 60068-2-28/2-30 95%RH at 55°C
Terminal capacity flexible/rigid cable (mm 2 ) 25-35
Poles 1 1 1
  2 2 2
  3 3 3
  4 4
Weight (g/pole) 120 120 120 125
CE-marking X
Bombardier Transportation Approval (EN 50155) X
Auxiliary contacts yes
Tele U (Undervoltage release) yes
Tele L (Shunt Trip) yes
Tele MP (Motor Operator) yes
PBS (Panel board switch) yes
Busbar system pin (top/bottom) yes/yes
Busbar system fork (top/bottom) -/yes yes/yes
Accessories yes
Read More

Miniature Circuit Breakers: Series GT

The Series GT miniature circuit breakers have a calibration temperature of 40°C. This differentiates them from the other Series G (30°C).
Within this series the GT10 has a smaller short circuit capacity than the GT25.
Following add-on devices can be delivered with these products: Auxiliary contacts, undervoltage release (Tele U), shunt trip (Tele L), motor operator (Tele Mp) and panel board switch (PBS).
Accessories are available for the MCB’s within our Series GT.
See below the main features for this range.

Features / Producttypes GT10 GT25
Standards EN/IEC 60947-2
Short circuit breaking capacity (kA) (AC) 10-30 15-100
Tripping characteristics B, C, D
Thermal settings ln (A) 0,5-63
Rated voltage AC Un (V) 240/415
Minimum operating voltage U B min (V) 12
Selectivity class
Mechanical/electrical endurance 20000/10000
Tropicalisation acc.to EN/IEC 60068-2 95%RH at 55°C
Terminal capacity flexible/rigid cable (mm 2 ) 25-35
Poles 1
  2
  3
  4
Weight (g/pole) 120
CE-marking X
Auxiliary contacts yes
Tele U (Undervoltage release) yes
Tele L (Shunt Trip) yes
Tele MP (Motor Operator) yes
PBS (Panel board switch) yes
Busbar system pin (top/bottom) yes/yes
Busbar system fork (top/bottom) -/yes
Accessories yes
Read More

Modular Control Devices – Galax – LightSensitive Switches

Easy to use timer to control lighting in shops, offices, car parks, advertising signs or even in the home via a photo cell to switch on/off a light when the light intensity drops below a programmed level.

  • In accordance with BSEN60669-1, VDE0633
  • Lux settings between 5-500
  • 1 or 2 c/o contact options
  • Nominal current 16A/250V
  • 1 or 3 modules or wall mounting version
  • Operating voltage 230V
  • DIN rail mounting or wall mounting
  • Surface mounting enclosure available for DIN rail mounted version
Read More

Miniature Circuit Breakers: Series G

The Series G miniature circuit breakers are covering a complete range of short circuit breaking capacities and tripping characteristics.
Our MCB’s within the Series G can be delivered with add-on devices:
Auxiliary contacts, undervoltage release (Tele U), shunt trip (Tele L), motor operator (Tele Mp) and panel board switch (PBS) (exception: G20).
Accessories are available for the MCB’s within our Series G, except for the G20.
The S-types are especially meant for shipping applications (G60 S and G100 S).
See below the main features for this range

Features / Producttypes G20 G30 G45 G60 G60 S G100 G100 S
Standards EN/IEC 60898-1 EN/IEC 60898-1 EN/IEC 60898-1 EN/IEC 60898-1 EN/IEC 60898-1
  EN/IEC 60947-2 EN/IEC 60947-2 EN/IEC 60947-2 EN/IEC 60947-2
  EN 60898 EN 60898
  EN 60947-2 EN 60947-2
Short circuit breaking capacity (kA) (AC, 60898) 3 3 4.5 6 6 10 10
Tripping characteristics C B, C B, C B, C, D B, C, D B, C, D B, C, D
Thermal settings ln (A) 6-40 2-40 2-40 0,5-63 0,5-63 0,5-63 0,5-63
Rated voltage

AC Un (V)
240/415 240/415 240/415 240/415 230/400 240/415 230/400
Minimum operating voltage U B min (V) 12
Selectivity class 3 3 3 3 3 3
Mechanical/ electrical endurance 20000/10000
Tropicalisation acc.to EN/IEC 60068-2 95%RH at 55°C 95%RH at 55°C 95%RH at 55°C 95%RH at 55°C 95%RH at 55°C
Tropicalisation acc.to IEC 60068-2-28/2-30 95%RH at 55°C 95%RH at 55°C
Terminal capacity flexible/rigid cable (mm 2 ) 25-35
Poles 1 1 1 1 1 1 1
  1+N 1+N
  2 2 2 2 2 2 2
  3 3 3 3 3 3 3
  4 4 4 4 4 4 4
Weight (g/pole) 120 120 120 120 125 120 125
CE-marking X
KEMA X X X X
CEBEC X X
Lloyd’s register of shipping X X
Auxiliary contacts yes
Tele U (Undervoltage release) yes
Tele L (Shunt Trip) yes
Tele MP (Motor Operator) yes
PBS (Panel board switch) yes
Busbar system pin (top/bottom) yes/yes
Busbar system fork (top/bottom) -/yes
Accessories yes
Read More

Modular Control Devices – 72×72 Classic andGalax Time Switches

Going from the pre-programmed switching of lighting (car parks, public roads, et.) over pre-programmed switching of heating equipment (homes and offices) to the pre-programmed switching of motors for pumps and fans.

Very easy programming by means of mechanical switches or digital buttons.

  • day program, week program and day/week program
  • 4 Modules
  • Nominal current : 16/250V
  • Operating voltage : 220-240VAC
Read More

Miniature Circuit Breakers: Series C (1+N,1Mod)

The Series C miniature circuit breakers are covering a complete range of 1Pole + Neutral in 1 module with different short circuit breaking capacities and tripping characteristics.

These MCB’s can be delivered with following add-on devices: auxiliary contacts and shunt trip (tele L).

Accessories are available for the Series C.

See below the main features for this range

Features / Producttypes C30 C45 C60
Standards EN/IEC 60898-1 EN/IEC 60898-1 EN/IEC 60898-1
  EN/IEC 60947-2 EN/IEC 60947-2
Short circuit breaking capacity (kA) (AC, 60898) 3 4.5 6
Tripping characteristics C B, C B, C
Thermal settings ln (A) 2-32
Rated voltage AC Un (V) 230
Minimum operating voltage U B min (V) 12
Selectivity class 3
Mechanical/electrical endurance 20000/10000
Tropicalisation acc.to EN/IEC 60068-2 95%RH at 55°C
Terminal capacity flexible/rigid cable (mm 2 ) 10-16
Poles 1+N, 1 mod.
Weight (g/pole) 120
CE-marking X
KEMA X
Auxiliary contacts yes
Tele U (Undervoltage release)
Tele L (Shunt Trip) yes
Tele MP (Motor Operator)
PBS (Panel board switch)
Busbar system pin (top/bottom) yes/yes
Busbar system fork (top/bottom)
Accessories yes
Read More

Modular Control Devices – Galax – Digital timeswitches

Easy programming, used to control the switching of lighting (car parks, advertising signs, etc.) and heating equipment (home and office) as well as the switching of pumps and fans from the simplest to the most sophisticated application.

  • In accordance with BSEN60669-2-3, VDE 0633
  • High accuracy programming
  • 1, 2 or 4 channel versions
  • Nominal current 16A/250V
  • Operating voltage 220-240V
  • Clear LCD display
  • Easy to program buttons
  • All with battery backup
  • Available in day, day-week and day-week-year programmable versions
  • Number of modules 1, 2 or 6
  • Antenna available for use with day-week-year timers to allow synchronization with Frankfurt atomic clock
  • Hand held programming tool
  • Can be surface mounted or DIN rail mounted
Read More

Modular Control Devices – Analogue TimeSwitches

Going from the pre-programmed switching of lighting (car parks, public roads) over pre-programmed switching of heating equipment to the pre-programmed switching of motors for pumps and fans and even to presence simulation.Easy to program by means of a dial on the front of the timer.

  • In accordance with BSEN60669-2-3, VDE 0633
  • 1, 2 channel versions
  • Nominal current 16A/250V
  • Operating voltage 220-240V
  • With or without battery backup
  • Available in day, week, day-day and day-week programmable versions
  • Number of modules 1, 3 or 6
  • Can be surface mounted or DIN rail mounted
Read More