Screwless MCB ElfaPlus Fixwell™
Screwless MCB ElfaPlus Fixwell™
Miniature Circuit Breakers: Series EP
Below you can find four of our types out of the Series EP.
The EP60 and EP100 are the most commonly used MCB’s in the range of our residential circuit breakers. The EP60 and EP100 are simular to the G60 and G100. However, the G-types are available with the tripping curves B-C-D,while the EP60 and EP 100 only use the K-curve. There is no 1+N execution in the K-curve. A second difference is that the MCB’s within the Series EP have a labelholder, so they can be tagged. For the Series G this is not the case.
The EP100 UC breaker can be used for direct and alternating current.
The EP100 R is used for railway applications.
Our MCB’s within the Series EP can be delivered with following add-on devices:
Auxiliary contacts, undervoltage release (Tele U), shunt trip (Tele L), motor operator (Tele Mp) and panel board switch (PBS).
Accessories are available for the MCB’s within our Series EP.
It also needs to be mentioned that this is not the complete Series EP. We also offer EP-breakers with UL approval. For more details you should go to the Series EP with UL approval page of our website..
See below the main features for this range.
| Features / Producttypes | EP60 | EP100 | EP100 UC | EP100 R |
| Standards | EN/IEC 60898-1 | EN/IEC 60898-1 | – | – |
| EN/IEC 60947-2 | EN/IEC 60947-2 | EN/IEC 60947-2 | – | |
| – | – | EN/IEC 60898-2 | – | |
| – | – | DIN VDE 0641 | – | |
| – | – | – | EN 60898 | |
| – | – | – | EN 60947-2 | |
| Short circuit breaking capacity (kA) (AC, 60898) | 6 | 10 | 6 | 10 |
| Tripping characteristics | 8-12 ln (K) and 6 in non tripping ≤ 2 sec. | 8-12 ln (K) and 6 in non tripping ≤ 2 sec. | B, C | B, C |
| Thermal settings ln (A) | 2-63 | 0,5-63 | 0,5-63 | 0,5-63 |
| Rated voltage AC Un ~ (V) | 240/415 | 240/415 | 230/400 | 230/400 |
| Rated voltage AC Un = (V) | – | – | 220/440 | – |
| Minimum operating voltage U B min ~ (V) | 12 | |||
| Minimum operating voltage U B min = (V) | – | – | 12 | – |
| Selectivity class | 3 | |||
| Mechanical/electrical endurance | 20000/10000 | |||
| Tropicalisation acc.to EN/IEC 60068-2 | 95%RH at 55°C | 95%RH at 55°C | 95%RH at 55°C | – |
| Tropicalisation acc.to IEC 60068-2-28/2-30 | – | – | – | 95%RH at 55°C |
| Terminal capacity flexible/rigid cable (mm 2 ) | 25-35 | |||
| Poles | 1 | 1 | 1 | – |
| 2 | 2 | 2 | – | |
| 3 | 3 | – | 3 | |
| 4 | 4 | – | – | |
| Weight (g/pole) | 120 | 120 | 120 | 125 |
| CE-marking | X | |||
| Bombardier Transportation Approval (EN 50155) | – | – | – | X |
| Auxiliary contacts | yes | |||
| Tele U (Undervoltage release) | yes | |||
| Tele L (Shunt Trip) | yes | |||
| Tele MP (Motor Operator) | yes | |||
| PBS (Panel board switch) | yes | |||
| Busbar system pin (top/bottom) | yes/yes | |||
| Busbar system fork (top/bottom) | -/yes | yes/yes | ||
| Accessories | yes |
Miniature Circuit Breakers: Series GT
The Series GT miniature circuit breakers have a calibration temperature of 40°C. This differentiates them from the other Series G (30°C).
Within this series the GT10 has a smaller short circuit capacity than the GT25.
Following add-on devices can be delivered with these products: Auxiliary contacts, undervoltage release (Tele U), shunt trip (Tele L), motor operator (Tele Mp) and panel board switch (PBS).
Accessories are available for the MCB’s within our Series GT.
See below the main features for this range.
| Features / Producttypes | GT10 | GT25 |
| Standards | EN/IEC 60947-2 | |
| Short circuit breaking capacity (kA) (AC) | 10-30 | 15-100 |
| Tripping characteristics | B, C, D | |
| Thermal settings ln (A) | 0,5-63 | |
| Rated voltage AC Un (V) | 240/415 | |
| Minimum operating voltage U B min (V) | 12 | |
| Selectivity class | – | |
| Mechanical/electrical endurance | 20000/10000 | |
| Tropicalisation acc.to EN/IEC 60068-2 | 95%RH at 55°C | |
| Terminal capacity flexible/rigid cable (mm 2 ) | 25-35 | |
| Poles | 1 | |
| 2 | ||
| 3 | ||
| 4 | ||
| Weight (g/pole) | 120 | |
| CE-marking | X | |
| Auxiliary contacts | yes | |
| Tele U (Undervoltage release) | yes | |
| Tele L (Shunt Trip) | yes | |
| Tele MP (Motor Operator) | yes | |
| PBS (Panel board switch) | yes | |
| Busbar system pin (top/bottom) | yes/yes | |
| Busbar system fork (top/bottom) | -/yes | |
| Accessories | yes |
Miniature Circuit Breakers: Series G
The Series G miniature circuit breakers are covering a complete range of short circuit breaking capacities and tripping characteristics.
Our MCB’s within the Series G can be delivered with add-on devices:
Auxiliary contacts, undervoltage release (Tele U), shunt trip (Tele L), motor operator (Tele Mp) and panel board switch (PBS) (exception: G20).
Accessories are available for the MCB’s within our Series G, except for the G20.
The S-types are especially meant for shipping applications (G60 S and G100 S).
See below the main features for this range
| Features / Producttypes | G20 | G30 | G45 | G60 | G60 S | G100 | G100 S |
| Standards | EN/IEC 60898-1 | EN/IEC 60898-1 | EN/IEC 60898-1 | EN/IEC 60898-1 | – | EN/IEC 60898-1 | – |
| – | EN/IEC 60947-2 | EN/IEC 60947-2 | EN/IEC 60947-2 | – | EN/IEC 60947-2 | – | |
| – | – | – | – | EN 60898 | – | EN 60898 | |
| – | – | – | – | EN 60947-2 | – | EN 60947-2 | |
| Short circuit breaking capacity (kA) (AC, 60898) | 3 | 3 | 4.5 | 6 | 6 | 10 | 10 |
| Tripping characteristics | C | B, C | B, C | B, C, D | B, C, D | B, C, D | B, C, D |
| Thermal settings ln (A) | 6-40 | 2-40 | 2-40 | 0,5-63 | 0,5-63 | 0,5-63 | 0,5-63 |
| Rated voltage AC Un (V) |
240/415 | 240/415 | 240/415 | 240/415 | 230/400 | 240/415 | 230/400 |
| Minimum operating voltage U B min (V) | 12 | ||||||
| Selectivity class | – | 3 | 3 | 3 | 3 | 3 | 3 |
| Mechanical/ electrical endurance | 20000/10000 | ||||||
| Tropicalisation acc.to EN/IEC 60068-2 | 95%RH at 55°C | 95%RH at 55°C | 95%RH at 55°C | 95%RH at 55°C | – | 95%RH at 55°C | – |
| Tropicalisation acc.to IEC 60068-2-28/2-30 | – | – | – | – | 95%RH at 55°C | – | 95%RH at 55°C |
| Terminal capacity flexible/rigid cable (mm 2 ) | 25-35 | ||||||
| Poles | 1 | 1 | 1 | 1 | 1 | 1 | 1 |
| – | – | – | 1+N | – | 1+N | – | |
| 2 | 2 | 2 | 2 | 2 | 2 | 2 | |
| 3 | 3 | 3 | 3 | 3 | 3 | 3 | |
| 4 | 4 | 4 | 4 | 4 | 4 | 4 | |
| Weight (g/pole) | 120 | 120 | 120 | 120 | 125 | 120 | 125 |
| CE-marking | X | ||||||
| KEMA | – | X | X | X | – | X | – |
| CEBEC | – | – | – | X | – | X | – |
| Lloyd’s register of shipping | – | – | – | – | X | – | X |
| Auxiliary contacts | – | yes | |||||
| Tele U (Undervoltage release) | – | yes | |||||
| Tele L (Shunt Trip) | – | yes | |||||
| Tele MP (Motor Operator) | – | yes | |||||
| PBS (Panel board switch) | – | yes | |||||
| Busbar system pin (top/bottom) | yes/yes | ||||||
| Busbar system fork (top/bottom) | -/yes | ||||||
| Accessories | – | yes |
Miniature Circuit Breakers: Series C (1+N,1Mod)
The Series C miniature circuit breakers are covering a complete range of 1Pole + Neutral in 1 module with different short circuit breaking capacities and tripping characteristics.
These MCB’s can be delivered with following add-on devices: auxiliary contacts and shunt trip (tele L).
Accessories are available for the Series C.
See below the main features for this range
| Features / Producttypes | C30 | C45 | C60 |
| Standards | EN/IEC 60898-1 | EN/IEC 60898-1 | EN/IEC 60898-1 |
| – | EN/IEC 60947-2 | EN/IEC 60947-2 | |
| Short circuit breaking capacity (kA) (AC, 60898) | 3 | 4.5 | 6 |
| Tripping characteristics | C | B, C | B, C |
| Thermal settings ln (A) | 2-32 | ||
| Rated voltage AC Un (V) | 230 | ||
| Minimum operating voltage U B min (V) | 12 | ||
| Selectivity class | 3 | ||
| Mechanical/electrical endurance | 20000/10000 | ||
| Tropicalisation acc.to EN/IEC 60068-2 | 95%RH at 55°C | ||
| Terminal capacity flexible/rigid cable (mm 2 ) | 10-16 | ||
| Poles | 1+N, 1 mod. | ||
| Weight (g/pole) | 120 | ||
| CE-marking | X | ||
| KEMA | X | ||
| Auxiliary contacts | yes | ||
| Tele U (Undervoltage release) | – | ||
| Tele L (Shunt Trip) | yes | ||
| Tele MP (Motor Operator) | – | ||
| PBS (Panel board switch) | – | ||
| Busbar system pin (top/bottom) | yes/yes | ||
| Busbar system fork (top/bottom) | – | ||
| Accessories | yes |
Miniature Circuit Breakers: Accessories
- VBS"Comb" busbars 1,2,3 & 4P in both pin and fork terminal formats
- Multifunctional auxiliary contacts in various configuration options
- Under voltage releases 24V DC, 48VDC, 240V AC with adjustable time delay
- Shunt trips 24V-60VAC, 110V-415VAC
- Motor operators for remote closing / opening of MCBs
- Panelboard switch
- Padlocking bracket
- Label printer
Miniature Circuit Breakers: 10kA 80A to 125AHti
The miniature circuit breakers of the Series Hti are the biggest breakers within our range of MCB’s (210 g/pole). They are meant to be used for heavier applications, their nominal current goes upto 125A and they have a calibration temperature of 40°C (for the other MCB’s within our range this is 30°C, except for the Series GT).
This is also reflected in the terminal capacity for rigid cables, 70mm 2 , while for other miniature circuit breakers this is maximum 16 (C-series) or 35mm 2.
Following add-on devices are available for this product: auxiliary contacts, shunt trip (Tele L) and panel board switch (PBS).
No accessories are available for the Series Hti.
See below the main features for this range.
| Features / Producttypes | Hti |
| Standards | EN/IEC 60947-2 |
| Short circuit breaking capacity (Acc.to EN/IEC 60947-2, curves B,C) (kA) | 10, 15 |
| Tripping characteristics | B, C, D |
| Thermal settings ln (A) | 80-100-125 |
| Rated voltage AC Un (V) | 230/400 |
| Minimum operating voltage U B min (V) | 12 |
| Selectivity class | – |
| Mechanical/electrical endurance | 10000/4000 |
| Tropicalisation acc.to EN/IEC 60068-2 | 95%RH at 55°C |
| Terminal capacity flexible/rigid cable (mm 2 ) | 70 |
| Poles | 1 |
| 2 | |
| 3 | |
| 4 | |
| Weight (g/pole) | 210 |
| CE-marking | X |
| Auxiliary contacts | yes |
| Tele U (Undervoltage release) | – |
| Tele L (Shunt Trip) | yes |
| Tele MP (Motor Operator) | – |
| PBS (Panel board switch) | yes |
| Busbar system pin (top/bottom) | – |
| Busbar system fork (top/bottom) | – |
| Accessories | – |
Miniature circuit breakers for photovoltaic applications
First solution for growing market of solar electric power.
- Compact design
- High voltage 880V upto 63A
- Safetylock with padlocking bracket
- Add-on devices for remote signalisation and tripping
- Add-on motor driver Tele MP
| Features / Producttypes | EP 100UC | EP 104UC |
| Curve | B | B |
| Thermal setting In (A) | 6-63 | 10-63 |
| Rated voltage DC Un (V) | 440 | 880 |
| Maximum operating voltage DC (V) | 250 | 1000 |
| Minimum operating voltage DC (V) | 12 | 12 |
| As loadbreak disconnector | yes | yes |
| Rated insulation voltage Ui, pollution degree 2 (V) | 500 | 1200 |
| Rated insulation voltage Ui, pollution degree 3 (V) | 440 | 1000 |
| Rated impulse withstand voltage Uimp (kV) | 6 | 6 |
| Dielectric rigidity (kV) | 2,5 | 2,5 |
| Mechanical/electrical endurance | 20.000/1.000 ops. | 20.000/1.000 ops. |
| Poles | 2 | 4 |
| Modules | 2 | 4 |
Miniature Circuit Breakers:MCB’s with UL approval
Below you can find our miniature circuit breakers with UL approval. A product that has the approval of Underwriters Laboratories (UL) has met all of UL’s safety requirements. Products that pass the muster of this company get the UL symbol of approval.
Underwriters Laboratories (UL) is one of the world’s leading providers of product safety and certification testing services, performing more than 100,000 product evaluations each year. Products that pass its stringent tests become registered with the company and can bear the UL Mark, which has become a widely trusted symbol for product safety and assurance. Nearly 20 billion products from 70,000 manufacturers bear the UL Mark.
Our MCB’s with UL approval can be delivered with following add-on devices:
Auxiliary contacts, shunt trip (Tele L) and motor operator (Tele Mp).
Accessories are available for the EP60 UL and the EP100UL.
See below the main features for this range.
| Features / Producttypes | EP60 UL | EP100 UL | EP100 ULH |
| Standards | EN/IEC 60898-1 | EN/IEC 60898-1 | – |
| EN/IEC 60947-2 | EN/IEC 60947-2 | – | |
| – | – | EN 60947-2 | |
| UL approval | UL 1077 | UL 1077 | UL 489 |
| UL-file | E151139 | E151139 | E256870 |
| Short circuit breaking capacity (kA) (AC, 60898) | 6 | 10 | – |
| Tripping characteristics | B, C, D | ||
| Thermal settings ln (A) | 0,5-63 | 0,5-63 | 0,5-32 |
| Rated voltage AC Un ~ (V) | 277/480 | 277/480 | 120/240 |
| Rated voltage AC Un = (V) | 110 | ||
| Minimum operating voltage U B min (V) | 12 | ||
| Selectivity class | 3 | ||
| Mechanical/electrical endurance | 20000/10000 | ||
| Tropicalisation acc.to IEC 60068-2-28/2-30 | 95%RH at 55°C | ||
| Terminal capacity flexible/rigid cable (mm 2 ) | 25-35 | ||
| Poles | 1 | 1 | 1 |
| 2 | 2 | 2 | |
| 3 | 3 | 3 | |
| 4 | 4 | – | |
| Weight (g/pole) | 125 | 125 | 130 |
| CE-marking | X | ||
| UR | X | X | – |
| CSA, CEC | X | X | – |
| VDE | X | X | – |
| NEC, OSHA | – | – | X |
| Auxiliary contacts | yes | ||
| Tele U (Undervoltage release) | – | ||
| Tele L (Shunt Trip) | yes | ||
| Tele MP (Motor Operator) | yes | ||
| PBS (Panel board switch) | – | ||
| Busbar system pin (top/bottom) | – | ||
| Busbar system fork (top/bottom) | – | ||
| Accessories | – |