Plug-in Relays – Series PRC
- Three basic mounting configurations, plug-in fast-on or solder mounting, printed circuit board solder mounting and plug-in 8, 11 or 14 pin relays
- Contact combinations from 2 to 4 pole changeover
- Control circuit voltages AC or DC from 6V to 240V
- Relays are 6, 10 and 12 amp rated
- Status indication either mechanical or LED or both
- Sockets for 35mm DIN rail mounting
Electronic Relays
- DIN rail or panel mounting, single or multi voltage
- Multiple application types:
-
- Motor re-start
- Earth leakage
- Phase unbalance, failure and phase sequence
- Voltage detection and protection
- Current detection
- Frequency control
- Thermistor
- Liquid level
- Reactive power regulation
- Multiple time and contact combinations
Minicontactors (Upto 5.5 kW) – Series M
- IEC 947 standards compliant
- 3-pole: 2.2kW to 5.5kW – 380/415V – AC3, 6 to 12 A – AC3
- Control circuit :AC, DC, low coil consumption (1.2 and 2W/24V). DC operating limits 0.8…1.1 Us and operating limits 0.7…1.3 Us
- 4-pole: 20A AC1,Control circuit : AC, DC
- Available in 3 different contact configurations
- Terminal protection degree IP2X
- Terminations: Screw, Ring Terminal, Fast-on – 2 x 2.8 mm (on request 1 x 6.3 mm) and Printed Circuit Board configurations
- Terminals:
-
- Numbered according to EN standards
- Posidrive terminal screws
- Mounting in line.
- Terminal numbering in accordance with EN50012 and EN50005.
- Coils:
-
- Protected against overheating
- Easily interchangeable
- Spare parts
- Wide Tolerance 0.7 – 1.3 x Us
- Mounting:
-
- 35 mm DIN-rail mounting or screw fixing
- Accessories:
-
- Front mounting auxiliary contact blocks.
- Two and Four pole contact configurations.
- Protection degree IP20.
- Side mounting auxiliary contact blocks.
- Single circuit contact blocks.
- Common for AC or DC contactors.
- Possible to mount up to 4 blocks in tandem.
- Delay ON Electronic timer for front, side or DIN mounting timing range 0.5 – 60 sec and 0.2 – 24 sec.
Industrial contactors (Upto 450 kW) – Series CL and CK
- IEC 947 standards compliant
- Complete range:
-
- 3 pole 4 – 450 kW at 400V, 9 – 105A AC3 rated
- 4 pole 25 – 1250A AC1 rated
- DIN rail mounting up to 55kW. Panel mounting across the whole range
- A wide range of AC, DC and Electronic coil control voltages. DC operating limits 0.8…1.1 Us and operating limits 0.7…1.3 Us
- Terminals in accordance with EN 50005, 50011 and 50012. Degree of protection IP20
- Wide range of accessories:
-
- Timers
- Interface devices
- Supressors RC, varistor and diode
- Auxiliary contact blocks side mounting, also front mounting 4 -55kW
- Mechanical/Electrical interlocks
- Mechanical latch 4 -55kW.
- Spare coils and contact kits available
- Wide voltage tolerance DC coil control
- Energy efficient low power coils
- Quiet operation DC and Electronic coil control
Contactors for Capacitors Switching – Series CSCN
With built-in resistance to switch three phase capacitor banks
“CSCN” contactors incorporate a front block with three early-make auxiliary contacts together with 6 quick discharge resistors (two per phase) through which the capacitors are switched to the network, reducing the current peak.
Once the resistors have damped the current peak, the main contacts shortcircuit the resistors, carrying the uninterrupted current.
A few miliseconds later the early-make auxiliary contact closes to guarantee that all current flows through the main contacts.
Variable Speed Drives – VAT 20
VAT20 is a small, flexible and low cost drive, for standard AC motors covering the power ratings from 0.2kW to 2.2kW at 200-240V Single Phase Power Source and from 0.75kW to 2.2kW at 380-460V Three Phase Power Source.
VAT20 includes a reliable set of both motor and drive protections, keypad and display, programmable digital and analogue I/Os, multi-mode frequency setting, Jog function, DC Braking and other functions only available in expensive drives. An optional accessory allows DIN rail mounting.
This drive range meet global UL and CSA standards, and is CE Marked including a built in Class A. Residential compliance is met by an external optional foot-print filter
Key Features
- Compact DIN rail or panel mounting range
- Voltage ratings: Single phase systems 200-240VAC and Three phase systems 380-460V, 50/60Hz
- Applicable motor Power ratings from 0.2 to 2.2kW
- Overload capacity 150% / 60 s
- Working ambient temperature -10 to 50°C
- Operator interface built-in keypad with LED display
- Built-in EMC filter Class B
- Global Standards UL & CSA and CE
Variable Speed Drives – VAT 200 Mini ACDrives
Powerful, Intelligent, Efficient, Stylish – Feature Packed Control Solutions
GE Consumer & Industrial introduces a complete new line of feature packed drives. Power ratings from:
- 0.4 to 2.2kW at 200-240V AC, single phase power supply
- 0.4 to 7.5kW at 200-240V AC, three phase power supply
- 0.75 to 55kW at 380-480V AC, three phase power supply
Key Features and advantages
- Compact size
- Built-in removable LED keypad
- Optional multilanguage LCD keypad
- Sensorless vector control or V/f control, selectable
- Built-in with ModBus RTU Communications
- Optional Field bus communication DeviceNet, Profi busDP
- Integrated EMC fi lters for U20…FS series
- Built-in with Dynamic Braking
- Performed with simple PLC and PID functions
- Easy start-up & tunning by PC or Keypad
- Advanced programming and drive control by built-in PLC function
- Easy maintenance
- With so many features the benefits are considerable and the cost savings irresistible
Variable Speed Drives – VAT 300 Advanced Multi-Purpose AC Drive
VAT300 is a new generation high performance VSD incorporating the latest technology in both software and hardware.
Features
- The new generation drive is more compact and has a smaller footprint covering power ratings from 0.75kW to 475KW in normal duty, or up to 400KW in heavy duty.
- High starting torque up to 200% or more, can be achieved even using standard AC induction motors.
- VAT300 is able to power not only standard induction motors, but also, the new generation of permanent magnet motors. In both cases, sensorless or close loop control are available.
- As well as satisfying Industry requirements, with its advanced and high performance functions, VAT300 is hailed a truly environmentally friendly drive with dedicated energy saving functions and careful selection of components to meet environmental directives.
Advantages
- Multimode control: all in one single drive
– V/f control for constant torque loads and quadratic loads
– Vector control, both closed loop and sensorless
– PM motor control, both closed loop and sensorless - Dynamic braking built-in drives up to 22kW
- Advanced features
– User programmable built-in PLC
– Configurable PID control
– Multi-pump control - Communications
– ModBus, ProfibusDP, DeviceNet, CANopen, CC-Link
– Multilanguage Interface - Dedicated version for lift applications – VAT300L
- Environmentally friendly design
– RoHS directive compliant
– High efficiency operation
– Dioxin-free plastic enclosure - Global Design
– Meets global standards UL, cUL, CE - Multi-language interface
SKF Line – Motor Protection Circuit Breaker
- SFK 0 is a compact and reliable manual motor starters rated from 0.1A to 25A in one frame sizes (45mm width). It represents thermal a magnetic protection of AC and DC system for three phase induction motors up to 12.5kW @ 400V AC with current ratings up to 25A. Conforms to IEC947 and VDE standards
- Manual pushbutton operation "STOP red " and "BLACK start" show the circuit status
- Conformity to IEC947-2-1.IEC 947-4-1 and VDE0660
- Setting ranges from 0.1-2013 25amps at 690 V AC and 220V DC
- Short circuit capacity of 65 kA up to setting range of 1.6 -2.5 A/400V
- Trip class 10
- Instant magnetic tripping (12 time the maximum operating current Ie)
- Quick fixing on DIN rail EN 50022-35, and two screws on the panel or wall
- Terminals protected against accidental contacts IP20
- Ambient temperature compensation from -5° – +40° C
- A complete range of accessories guarantees a solution for all types of applications
- Surface or Flush mounting enclosure options
- IP41 or IP55 enclosure ingress protection
- Undervoltage release trip coil
- Status indication lamps
- Emergency stop mushroom pushbutton
- Padlocking device
Motor Protection Devices – Surion
- Surion, a complete range of compact and reliable manual motor starters rated from 0,1A to 63A in two different frame sizes (45 and 55mm width). It represents a new motor protection system for switching and protecting three phase induction motors up to 30kW @ 400V AC with current ratings up to 63A.
- Both the rocker lever and rotary handle mechanism guarantee clear status indication with ON-OFF-Tripped positions showing the circuit status as a glance
- Surion starters are available worldwide, and are specifically designed to enhance the total connectivity with the rest of the Power Protection product families. They can be combined with the minicontactors types M and contactors types CL to form a fuseless starter solution.
- The entire line is available with thermal+magnetic trip for complete motor protection, or with magnetic protection only for short circuit protection in combination with starters.
- A complete range of accessories guarantee a solution for all types of applications. These include auxiliary contacts (frontal and lateral-left and right), trip indicator (short circuit and overload), short circuit indicator only, shunt trip, undervoltage release (with and without early make auxiliary contacts), enclosures, busbar system, etc